자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

bmw x5 ghost installer Immobiliser 2

Secures your vehicle from key cloning and prevents thieves from driving the vehicle using original keys. Our latest immobiliser connects to your vehicle's data network, CAN, and the unique PIN code needs to be entered for the engine to start.

Ghost, unlike trackers, doesn't emit radio frequency signals, and therefore cannot be identified by diagnostic tools. Also, it doesn't have any LED indicators or buttons that can give the impression of its presence in your car or van.

Anti-key Cloning

The ghost immobiliser is designed to combat key hacking and cloning. This device connects to the CAN data network in your vehicle and creates a unique pin code sequence that is activated by pressing the buttons that are factory-installed on your dashboard and the steering wheel. This prevents the thief from being able to start your vehicle. If the incorrect PIN code is entered, the engine cannot be started and it will be impossible for them to drive away with your joy and pride.

Ghost immobilisers use an innovative technology that is extremely difficult for thieves to beat. The ghost immobiliser, unlike physical deterrents like wheel locks or steering lock that can be cut, is a discreet electronic device. It's not even detected by thieves because it does not emit radio signals and is operated in a silent manner.

The next-generation immobiliser protects your car from a variety of threats, including key hacking relay attacks, key hacking and cloned copies. It also stops the thief from adding a key or replacing your ECU since it will not allow them to start the car without first entering the correct PIN code.

Unlike other immobilisers, the ghost immobiliser 2 does not require any additional remote or key fobs for operation. It can be deactivated using an app on the smartphone of the driver. This makes it perfect for those occasions when you have to hand your car over to valet parking or maintenance without keys.

The Autowatch Ghost-II represents the latest evolution of Ghost immobiliser. It is designed to be as simple and convenient to use as is possible, yet remains as secure as ever. This is achieved by connecting the Ghost-II with the vehicle's CAN data network, meaning there aren't any wires that can be hidden or easily found. It comes with built-in features that allow users to disable the Ghost-II simply by connecting it to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking has become the latest technique used by professional car thieves. Thieves have access to your vehicle's OBD port with no more than an laptop, an app and a few cables, which can be purchased on the internet for under PS50. Once they have access, they can do anything they like to do, from resetting your vehicle's fault codes, tuning your vehicle, or taking it away within a matter of minutes.

If you have a Ghost immobiliser, it can stop your car being stolen using this method, by needing an unique PIN code sequence is entered alongside the fob of your key in order to start the engine and drive away. It does this by communicating with the vehicles ECU (Engine Control Unit) via the CAN Data circuit and is indetectable to any RF scanning or code grabbing technology. It even has a Service/Valet mode which allows your vehicle to be started without the need for a PIN.

To use an OBD hacking device you must have an operating system that is capable of interpreting the OBD protocol. These can be purchased for under PS100 on ebay or Amazon. You will also require a cable that has OBD pins that are connected to the CAN Bus. These cables are available on Amazon/Ebay around PS50. The cable needs to be connected to the wiring harness of your car, like the radio wiring harness.

Once the hacker has established a connection to your vehicle's OBD port, they will send diagnostics requests to the system at a high baud rate which can cause CAN to crash, and prevent systems within your vehicle from functioning. This can cause your car's engine to stall or even stop working.

No need for additional remotes or key fobs

A car immobiliser is great piece of anti theft technology that is used by billions of modern cars all over the world. Utilizing engine ECU software to prevent cars from starting if a fake transponder signal is sent to it an aftermarket immobiliser is an excellent method of protecting your vehicle.

It is possible for a thief to know the code that disables an immobiliser, and bypass it. A burglar could easily take the battery off of most key fobs by squeezing them open. They could then use an instrument to take out the circuit board inside an immobiliser and replace it with a blank. Then they will be in a position to start your vehicle.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes required. The immobiliser communicates with the engine ECU (Engine Control Unit) through a discreet quiet CAN data circuit that is undetectable with diagnostic tools, such as those employed by high-tech thieves. It does not include a traditional keyfob, which has an LED indicators, which means it's inaccessible.

There will be instances when you need to deactivate Autowatch ghost Installation Ghost 2's automatic protection, for example during an valet parking or a service work. Ghost CAN immobilisers have a mode called 'Service Mode that you can activate with just a click of a phone button. The car is still operated however its maximum speed will be limited to 36mph for added security.

If you'd like more information about the TASSA accredited ghost immobiliser, contact us today to arrange a demonstration at our workshop. A member of our team will explain the process and will give you a Ghost 2 emergency card, installation certificate, and security guarantee.

Simple Change of PIN Code

Ghost is the latest generation of device that protects your car without cutting wires or installing key fobs from an aftermarket. It connects directly to your vehicles CAN data network and a personal PIN code is programmed in it using buttons on your steering wheel & dash. The device does not emit RF signals, therefore it is not able to be tampered with. This makes it undetectable by sophisticated RF scanning or code grabbing technologies that modern thieves use.

The PIN code can be changed to lock out previous drivers, or even add an override code if you forget the sequence. The installer will guide you through the process to do this during installation. The system also comes with the valet mode feature that can be used to temporarily disable the pin input sequence so that your mechanic or garage can service the vehicle without needing to know the code. This is a great option for those who don't want their PIN sequence to be revealed but still would like to leave their vehicle with valet parking or service.

Unlike Thatcham products that require additional key-fobs in order to operate, Ghost is a discreet system which takes advantage of the buttons inside your vehicle to create a unique interchangeable PIN code sequence. This sequence is entered through the app on your smartphone. No extra LED indicators are thrown out, and your vehicle will be protected without any risk of being disabled.

Every vehicle is tested

Ghost immobilisers, unlike key fobs that require you to press buttons, is hidden under the steering wheel or dash. It is not obvious that it's there. The device is connected to your vehicle's CAN network and a PIN number can be programmed using buttons on your car. The system stops your engine from starting unless the code is entered before. This means that thieves are unable to duplicate the keys on your car or gain access to the OBD port to hack your vehicle.

Ghost can be utilized in all vehicles that use electric vehicles, vans, motorhomes and bicycles. It's also extremely versatile and can be set to disable under different circumstances. For instance, it can be programmed to enter Valet mode when the vehicle is being taken to a valet parking or service company. This means that your car can be operated within a specified 30mph speed limit, and the audi rs4 ghost installer immobiliser will activate itself once it is returned to your property.

Another excellent feature is that the device can be reset to the personalized PIN code at any point. This is useful when you forget the code or the device is inoperable and is just as good as new.

It is also inaccessible to anyone who doesn't know about it is. It works by running through the buttons on the dashboard of your car and on the steering wheel and uses the data they transmit to recognise the button that was hit. This makes it a completely secure and reliable security system that isn't affected by RF scanning, jamming or door lock pick sets.